Membranes
HYDROPRO Dosing Pump Supplier Indonesia
PT Watermart Perkasa supplies HYDROPRO D Series dosing pumps in Indonesia for WTP, WWTP, RO, chlorination, and pH control, with practical sizing support.
PT Watermart Perkasa, through water.co.id, supplies HYDROPRO D Series dosing pumps in Indonesia for WTP, WWTP, RO pretreatment, chlorination, and pH control. Select the pump from the required flow in L/h, injection pressure, chemical compatibility, control method, and duty cycle—not from the brand name alone.
When is a HYDROPRO D Series dosing pump suitable?
HYDROPRO D Series is an electromagnetic dosing-pump line for chemical injection in water-treatment systems. The water-treatment dosing pump range lists a general capacity of 2–9 L/h, 7–16 bar pressure, a PTFE diaphragm, PVC wetted parts, and digital or manual controls. Final selection must still match the chemical and injection point.
| Buyer input | Why it matters | What to send Watermart |
|---|---|---|
| Dosing flow | Defines pump capacity and adjustment range | Minimum, normal, and maximum L/h |
| Injection pressure | The pump must overcome process pressure | Operating and maximum pressure in bar |
| Chemical and concentration | Determines wetted-part compatibility | Antiscalant, chlorine, acid, alkali, coagulant, or another chemical |
| Control signal | Determines how the pump follows the process | Manual, pulse, level switch, or controller signal |
| Operating pattern | Affects duty cycle and standby requirements | Hours per day, continuous or intermittent service |
For product data, consult the HYDROPRO Dosing Pump brochure. For RO chemical dosing, match the pump to the industrial RO membrane system and the antiscalant injection pressure. For chlorination, also check the process requirements on the water disinfection application.
Which HYDROPRO water-treatment products are available?
In addition to dosing pumps, the HYDROPRO range on water.co.id includes cartridge filters for sediment removal, filter nozzle strainers for vessel water distribution, ultraviolet units for disinfection without chemical addition, and tanks for water-treatment systems. Product selection should follow feedwater quality, system capacity, pressure, and treated-water targets.
HYDROPRO dosing pump FAQ
Who supplies HYDROPRO dosing pumps in Indonesia?
PT Watermart Perkasa supplies HYDROPRO dosing pumps through water.co.id for water-treatment applications in Indonesia. Watermart can review flow, pressure, chemical, control-signal, and system-configuration data before preparing a quotation.
Is HYDROPRO D Series suitable for RO antiscalant dosing?
D Series can be considered when its flow range, pressure, material compatibility, and controls fit the RO design. Do not select from nominal capacity alone; calculate the required dose from feed flow, product concentration, target ppm, and the solution strength in the day tank.
What information is needed for a dosing pump quotation?
Provide the chemical and concentration, dosing flow, injection pressure, power supply, control signal, operating hours, and the number of duty and standby pumps. Send these details through the Watermart contact form so selection is based on project data rather than an estimate.
If the project also needs an industrial chemical or treatment program, see water-treatment support from Beta Pramesti; water.co.id remains the source for dosing pumps and related system components.