Samarium (Sm) in Water Treatment

Quick Answer

Samarium (Sm) is a lanthanide with atomic number 62. PubChem lists its standard state as solid and its relative atomic mass as 150.4.

Samarium is not a routine drinking-water target but may matter in mining, electronics, magnet or rare-earth recovery streams. Precipitation, adsorption, ion exchange and membrane separation should be evaluated as both removal and resource-recovery options.

Interesting Facts

• Samarium–cobalt magnets retain useful magnetic performance at temperatures that challenge many other permanent magnets.
• Samarium-149 is an unusually strong neutron absorber and is important in reactor physics.
• In oxygenated water, dissolved samarium is usually considered as Sm³⁺; pH, carbonate, and suspended solids can shift it between dissolved and particulate forms.

Water-treatment Design Implications

An element name alone is not enough to select treatment equipment. Confirm chemical form or speciation, total and dissolved concentration, pH, alkalinity, competing ions and the product-water target. Send the water-analysis results to Watermart to identify additional testing and shortlist processes before equipment is specified.

Summary Data Sources

• PubChem — Samarium
• IUPAC Periodic Table of Elements
• WHO — Chemical hazards in drinking-water

Practical Reference for a Water Analysis

Start with total and dissolved results. Filtered and unfiltered samples help distinguish dissolved ions or complexes from colloids and mineral particles. Record pH, conductivity, alkalinity, suspended solids, and likely industrial inputs at the same time.

Validate treatment on the actual matrix. A process name is not a performance guarantee. Competing ions, organic ligands, redox conditions, pH, suspended solids, and required recovery can change removal sharply. Use bench or pilot testing for unusual industrial streams, and make a mass balance for concentrate, sludge, regenerant, or spent media.

Do not invent a drinking-water limit from the periodic table. A health value applies only to the specified substance, route, averaging period, and jurisdiction. Check the current Indonesian requirement and the intended reuse or discharge permit before setting the design target.