Titanium (Ti) in Water Treatment

Quick Answer

Titanium (Ti) is a transition metal with atomic number 22. PubChem lists its standard state as solid and its relative atomic mass as 47.867.

Titanium is not a common target in ordinary water treatment but may occur in mining or specialized industrial wastewater. Total versus dissolved concentration, oxidation state, pH and complexing agents should be measured before evaluating precipitation, adsorption, ion exchange or membranes.

Interesting Facts

• Titanium resists corrosion because it rapidly forms a thin, adherent oxide film when exposed to oxygen.
• Titanium dioxide is a widely used white pigment and photocatalyst; a TiO₂ particle is not chemically equivalent to dissolved titanium.
• High “total titanium” with low dissolved titanium often points to mineral or pigment particles, making solids separation the first question.

Water-treatment Design Implications

An element name alone is not enough to select treatment equipment. Confirm chemical form or speciation, total and dissolved concentration, pH, alkalinity, competing ions and the product-water target. Send the water-analysis results to Watermart to identify additional testing and shortlist processes before equipment is specified.

Summary Data Sources

• PubChem — Titanium
• IUPAC Periodic Table of Elements
• WHO — Chemical hazards in drinking-water

Practical Reference for a Water Analysis

Start with total and dissolved results. Filtered and unfiltered samples help distinguish dissolved ions or complexes from colloids and mineral particles. Record pH, conductivity, alkalinity, suspended solids, and likely industrial inputs at the same time.

Validate treatment on the actual matrix. A process name is not a performance guarantee. Competing ions, organic ligands, redox conditions, pH, suspended solids, and required recovery can change removal sharply. Use bench or pilot testing for unusual industrial streams, and make a mass balance for concentrate, sludge, regenerant, or spent media.

Do not invent a drinking-water limit from the periodic table. A health value applies only to the specified substance, route, averaging period, and jurisdiction. Check the current Indonesian requirement and the intended reuse or discharge permit before setting the design target.