Accessories & Ancillaries
Codeline Pressure Vessel RO 8 Inch
Compare Codeline 80E and 80S 8-inch RO pressure vessels by design pressure, 8040 element count, port configuration, skid layout, and spare-part scope.
Codeline 8-Inch RO Pressure Vessels for 8040 Membranes
Codeline 8-inch RO pressure vessels hold 8040 membrane elements in commercial and industrial Reverse Osmosis skids. PT Watermart Perkasa supplies 80E end-entry and 80S side-entry series plus spare parts in Indonesia; select by design pressure, element count, port arrangement, skid layout, service clearance, and the existing-unit nameplate.
Updated 4 August 2026: Codeline receiving and quotation checks were added to clarify evidence required before purchase.
Codeline 80E or 80S: select by ports and skid layout
Choose 80E when end-entry ports suit the skid piping; choose 80S when the feed and concentrate headers require side entry. Port arrangement is not the only difference: either series must still match maximum design pressure, 8040 element count, vessel length, permeate connections, end-closure service space, and mounting components.
| 8-inch vessel check | Codeline 80E | Codeline 80S | Buyer data that decides |
|---|---|---|---|
| Feed and concentrate | End entry | Side entry | Header direction, vessel spacing, and pipe access |
| Membrane elements | Standard 8-inch RO elements; match length and count | Standard 8-inch RO elements; match length and count | 8040 model, elements per vessel, and vessel quantity |
| Listed pressure classes | 300, 450, 600, 1,000, or 1,200 PSI | 150, 300, 450, 600, 1,000, or 1,200 PSI | Operating pressure, maximum design pressure, temperature, and duty |
| New skid | Codeline 80E end-entry data | Codeline 80S side-entry data | P&ID, rack layout, port sizes, saddles, straps, and service space |
| Retrofit or spare part | Match the series, model, revision, and both vessel ends | Match the series, model, revision, and both vessel ends | Nameplate, dimensions, and closure, adapter, seal, retainer, and bearing-plate photos |
An 8-inch diameter or 8040 description alone does not identify the correct vessel. Verify the complete model code, pressure class, ports, closure, shell length, and component revision before a complete vessel or spare part enters the quotation.
What should a membrane housing supplier confirm?
A supplier quotation should state the complete vessel, model, pressure class, element count, port arrangement, closure, mounting accessories, documents, delivery, and service boundary. Also define whether the project needs a unit for a new skid, an installed-housing replacement, or end-closure spare parts; these are different requests and should not be combined under a generic “housing” description.
| Requirement type | Main data | Result to confirm |
|---|---|---|
| New RO skid | 4040 or 8040 membrane model, element count, design pressure, flow configuration, layout, and service space | 40E/40S or 80E/80S series, pressure class, vessel length, ports, saddles, straps, and closure |
| Vessel retrofit | Old nameplate, shell dimensions, photos of both ends, port position, piping, saddles, and replacement reason | Mechanical and hydraulic fit or a defined list of skid modifications |
| End-closure spare part | Vessel model/revision, old part number, component photos, installation position, and quantity | Adapter, seal, retainer, bearing plate, port, or kit for the correct revision |
| Capacity addition | Existing train data, vessel count, staging, membrane model, pressure, and skid space | Effects on piping, pumps, instrumentation, controls, and membrane-change access |
For spare parts, a diameter photo is not enough. The vessel code and component revision help prevent ordering a seal, adapter, or retainer that looks similar but belongs to another series.
What determines a Codeline RO pressure vessel price?
The quotation needs the complete vessel code because two housings for the same element size are not necessarily interchangeable. The 4040 or 8040 size, end-entry or side-entry series, pressure class, element count, port material, and end-closure scope can change both configuration and price.
| Quotation factor | Information to send | Risk if not matched |
|---|---|---|
| Series and pressure rating | Complete model code plus operating and design pressure | Vessel does not suit the duty or design margin |
| Element size and count | 4040 or 8040 membrane model and quantity per housing | Vessel diameter, length, or adapter arrangement does not fit |
| Port arrangement | Feed, concentrate, and permeate port position, size, and material | Skid pipework needs modification |
| End closure and spare parts | Photos of closure, adapter, seals, retainer, and bearing plate | Parts are ordered for the wrong series or revision |
| Delivery and installation | Project location, quantity, saddles, straps, and handling space | Quotation scope or schedule is incomplete |
Send the nameplate, photos of both vessel ends, skid layout, and spare-parts list through the Watermart contact form. Watermart will confirm model and availability before pricing; this page does not publish a fixed price because project configurations differ.
When Should You Select a Codeline 80S30?
Select a Codeline 80S30 when the design requires an 8-inch side-entry housing for 8040 elements and every nameplate detail matches the system duty. The 30 identifies the model’s pressure class; it is not a flow or membrane-count figure. In a retrofit, shell diameter alone is insufficient because ports, adapters, seals, bearing plates, saddles, and service clearance must match.
| Information to send Watermart | Why it is needed |
|---|---|
| Nameplate photo and vessel code | Confirms the 80S30 series and correct pressure rating |
| Quantity and model of 8040 membranes | Checks element length and configuration |
| Operating and design pressure | Checks vessel suitability and design margin |
| Feed, concentrate, and permeate port positions | Prevents a mismatch with skid pipework |
| End-closure and old spare-part photos | Matches adapters, seals, retainers, and bearing plates |
For dimensions, element-count variants, and procurement data, see the dedicated Codeline 80S pressure-vessel page. If the skid uses 4040 elements, compare the 40E or 40S families instead; a similar-looking model code is not evidence of interchangeability.
Codeline Pressure Vessels and Spare Parts in Indonesia
PT Watermart Perkasa supplies Codeline membrane housings and spare parts for industrial, commercial, and municipal Reverse Osmosis (RO) systems. Model availability, part numbers, and lead time are confirmed when a quotation is requested.
Watermart supplies Codeline RO pressure vessels, 4-inch and 8-inch membrane housings, and RO spare parts. These products are key components when customers build or replace Reverse Osmosis systems, select RO membranes, or retrofit existing RO skids. For complete systems, Watermart also supplies GreensandPlus for iron/manganese pretreatment, DIONIX resin for polishing/deionization, and Pentair automatic filters and control valves.
Buyer Requirement Targets
- Codeline pressure vessels for 4040 and 8040 RO membranes
- side-entry and end-entry RO membrane housing
- Codeline spare parts matched to the vessel model and revision for maintenance
- pressure vessel retrofit on existing RO skids
- pressure vessels for brackish water, seawater, and process water systems
- technical support for vessel selection by pressure, element count, and system configuration
Quick Codeline Pressure Vessel Selection Guide
| System need | Common series to consider | Selection notes |
|---|---|---|
| Commercial or industrial RO with 4 inch elements | Codeline 40E or 40S | Fits 4040 elements; match the pressure rating to feed pressure and safety factor. |
| Large industrial RO with 8 inch elements | Codeline 80E or 80S | Fits 8040 elements; choose end entry or side entry based on skid layout. |
| Brackish water or higher-pressure process water | Codeline 80H or related high-pressure series | Check design pressure, elements per vessel, and port material. |
| Retrofit of an existing RO skid | Replacement series based on the old vessel dimensions | Watermart can review vessel length, port connections, saddles, adapters, and spare-part needs. |
For buyers searching for a Codeline pressure vessel supplier in Indonesia, 8040 RO membrane housing, or Codeline spare parts, prepare the membrane count, operating pressure, connection type, and nameplate photos so the selection can move faster.
List of Codeline Products and Parts for Water Treatment Systems
Pentair Codeline includes pressure vessels and membrane housings for Reverse Osmosis (RO), ultrafiltration, and industrial or municipal water-treatment systems. Series that can be reviewed with PT Watermart Perkasa include:
- Codeline 40E Series
- Codeline 40S Series
- Codeline 80E Series
- Codeline 80H Series
- Codeline 80S Series
- Codeline 80U Series
- Codeline 40S Series (Non Coded)
- Codeline 80S Series (Non Coded)
Each Codeline series has design, material, and compatibility requirements that must match the RO elements and system duty. Availability of Codeline spare parts such as O-rings, adapters, ports, retainers, bearing plates, saddles, strap assemblies, and other components is confirmed from the vessel model, revision, and part number.
Codeline 40E Series Membrane Housing
The Codeline 40E Series (models 40E30N, 40E60, 40E100) is a high-pressure membrane housing family for industrial and municipal RO systems. It uses a filament-wound epoxy/glass composite shell and thermoplastic components for 4-inch membrane elements.
Key Features
- High-Strength Composite Construction: Epoxy/glass composite shell; pressure suitability follows the model and nameplate.
- Engineering Thermoplastic Fittings: Chemical-resistant thermoplastic adapters and ports.
- Precision O-Ring Seals: Match the Ethylene Propylene O-ring to the part number and installation conditions.
- Industry Standard Dimensions: Easily integrated into new or retrofit RO systems.
Parts and Specifications Table
| DRG REG | Qty | Description | Material | 40E30N Part Number | 40E60 Part Number | 40E100 Part Number |
|---|---|---|---|---|---|---|
| 1 | 1 | Shell | Filament Wound Epoxy/Glass Composite | Order section | Order section | Order section |
| 2 | AR | PWT Seal | Ethylene Propylene - O Ring | NA | As required | As required |
| 3 | 2 | Adapter | Engineering Thermoplastic | NA | As required | As required |
| 4 | 2 | Adapter Seal | Ethylene Propylene - O Ring | 45296 | 45294 | 45294 |
| 5 | 2 | Permeate Port | Engineering Thermoplastic | NA | NA | 47469 |
| 6 | 2 | Permeate Port Seal | Ethylene Propylene - O Ring | NA | NA | 45299 |
| 7* | 2 | Plug Seal | Ethylene Propylene - O Ring | 45317 | 45317 | 45317 |
| 8* | 2 | Sealing Plate | Engineering Thermoplastic | NA | NA | 50481 |
| 9 | 2 | Port Retainer Set | CF8M Cast SST, Two-Piece Set | NA | NA | 50489 |
| 10 | 2 | End Plug Sub Asm./Bearing Plate | Eng. Thermoplastic/6061-T6 Hard Anod. Alum Alloy | 95927*** | 50312*** | 47471 |
| 11 | 2 | Port Retainer | PH 15-7 MO SST | NA | 45244 | NA |
| 12 | 2 | F/C Port Seal | Ethylene Propylene - O Ring | NA | NA | 45299 |
| 13* | 2 | F/C Port | UNS32750 | NA | NA | 47472 |
| 14* | 2 | Retaining Ring | 316 Stainless Steel | 45260 | 45260 | 45260 |
| 15* | AR | Saddle | Engineering Thermoplastic | 45058 | 45058 | 45058 |
| 16* | AR | Strap Assembly | 304 Stainless Steel Cushion | 47459 | 47459 | 47459 |
For full details, please download the following official document:
Download Exploded view and parts table Codeline 40E series.pdf
Application
- Industrial and municipal wastewater treatment plants
- Desalination and brackish water plants
- High-purity process water
- RO system retrofits and upgrades
- OEM water treatment skids
PT Watermart Perkasa Excellence
PT Watermart Perkasa helps select Codeline 40E Series vessels and spare parts by model, pressure, port arrangement, and application. Confirm stock and lead time when requesting a quotation.
Other Series: Codeline 40S, 80E, 80H, 80S, 80U, and Non Coded Series
Codeline 40S Series
The Codeline 40S Series (40S30, 40S45, 40S60) offers membrane housing with filament wound epoxy/glass composite shell and stainless steel and thermoplastic components. Suitable for industrial and municipal high pressure RO applications.
Download Exploded view and parts table Codeline 40S series.pdf
Codeline 80E Series
Codeline 80E Series (80E30, 80E45, 80E60, 80E100, 80E120) is an 8 inch membrane housing for high pressure RO applications. It utilizes an epoxy/glass composite shell, ethylene propylene O-rings, and thermoplastic modular components.
Download Exploded view and parts table Codeline 80E series.pdf
Codeline 80H Series
The Codeline OCTA 80H series (80H15, 80H30, 80H45, 80H60, 80H100, 80H120) is designed for ultra-high pressure RO and ultrafiltration applications. Modular parts such as thrust cones, O-rings, adapters, and bearing plates are available.
Download Exploded view and parts table Codeline 80H series.pdf
Codeline 80S Series
The Codeline Octa 80S Series (80S15, 80S30, 80S45, 80S60, 80S100, 80S120) is an 8-inch RO pressure-vessel family. Match membrane dimensions, pressure, port arrangement, and spare parts to the exact model.
Download Exploded view and parts table Codeline 80S series.pdf
Codeline 80U Series
The Codeline OCTA 80U series (80U30, 80U45, 80U60) is a membrane housing with modular design, epoxy/glass composite shell, and stainless steel and thermoplastic components for industrial and municipal RO applications.
Download Exploded view and parts table Codeline 80U series.pdf
Codeline 40S Series (Non Coded)
The Codeline 40S Non Coded Series (40S30 NC, 40S45 NC, 40S60 NC) offers membrane housing with high strength and ease of maintenance, suitable for medium pressure RO systems.
Download Exploded view and parts table Codeline non coded 40S series.pdf
Codeline 80S Series (Non Coded)
Codeline OCTA 80S Non Coded (80S15 NC, 80S30 NC, 80S45 NC, 80S60 NC) is a membrane housing for industrial RO applications that require high mechanical and chemical resistance.
Download Exploded view and parts table Codeline non coded 80S series.pdf
Product and Service Excellence of PT Watermart Perkasa
- Availability Check: Model, part number, stock, and lead time are confirmed for each request.
- Part Matching: Nameplate and old-component photos help prevent series or revision errors.
- Technical Support: Our technical team is ready to assist with product selection consultation, installation, and troubleshooting of your RO system.
- Delivery Planning: The schedule depends on unit availability, project location, and vessel-handling requirements.
Codeline Pressure Vessel FAQ
Who supplies Codeline pressure vessels in Indonesia?
PT Watermart Perkasa supplies Codeline pressure vessels, RO membrane housings, and spare parts matched to the vessel model through water.co.id for industrial, commercial, municipal, and process-water Reverse Osmosis systems in Indonesia.
What data should I prepare before selecting a Codeline vessel?
Prepare the 4040 or 8040 membrane size, element count per vessel, operating and design pressure, end-entry or side-entry requirement, port material, nameplate photos, and skid layout. These details help Watermart match 40E, 40S, 80E, 80H, 80S, 80U, or non-coded Codeline models.
What is the difference between a complete vessel and an end-closure spare-part request?
A complete vessel requires the shell, pressure class, length, ports, saddles, straps, and closure to be selected as one assembly. An end-closure spare part must match the installed vessel model and revision using part numbers and component photos; a 4040 or 8040 description alone is not enough.
Does Watermart also supply RO components besides Codeline?
Yes. For a single procurement package, Watermart also supplies RO membranes, water filter cartridges, dosing pumps, filter media, ion exchange resin, control valves, and other RO spare parts.
What should be checked when a Codeline vessel or spare part is received?
Match the purchase order, model code, pressure class, element count, ports, closure, part number, and packaging condition before installation. For retrofit projects, keep nameplate and old-component photos so a series or revision mismatch can be traced before the vessel is pressurized.
Ordering and Consultation Information
For Codeline membrane housing, spare parts, or technical consultation, contact PT Watermart Perkasa by WhatsApp, email, or the website form. Send the model, pressure, element count, and port arrangement so the team can check the fit.
- WhatsApp: Click here to chat
- Email: info@water.co.id
- Contact Form: Please fill out the contact form on our website
Download Complete Datasheet and Parts Table
- Download Exploded view and parts table Codeline 40E series.pdf
- Download Exploded view and parts table Codeline 40S series.pdf
- Download Exploded view and parts table Codeline 80E series.pdf
- Download Exploded view and parts table Codeline 80H series.pdf
- Download Exploded view and parts table Codeline 80S series.pdf
- Download Exploded view and parts table Codeline 80U series.pdf
- Download Exploded view and parts table Codeline non coded 40S series.pdf
- Download Exploded view and parts table Codeline non coded 80S series.pdf
Conclusion
PT Watermart Perkasa supplies Codeline membrane housings and spare parts for industrial, municipal, and commercial applications. Send the model code, pressure, element count, port arrangement, and nameplate photos for technical review and quotation.