Wermart Perkasa

Membranes

Filter & Softener Control Valves Indonesia

Select filter and softener control valves by service/backwash flow, vessel size, cycle sequence, connections, pressure, and controls. Compare Watermart brands.

How to select filter and softener control valves

Filter and softener control valves are selected by service and backwash flow, vessel size, cycle sequence, connections, available pressure, and automation needs. PT Watermart Perkasa supplies AQ Matic, Autotrol, Fleck, Runxin, and Siata options in Indonesia; model codes, accessories, availability, and commissioning scope are confirmed at quotation.

Updated 3 August 2026: the distinction between multiport control, solenoid, and pneumatic valves and the buyer’s sizing data were clarified.

When should a control, solenoid, or pneumatic valve be used?

Use a multiport control valve when one device must sequence service, backwash, rinse, or regeneration on a filter or softener. A solenoid valve is better suited to a simple on/off command, while a pneumatic valve fits duties where an air actuator, fail position, or process requirement makes it appropriate.

FunctionInitial pathData to verify
Automatic media filterMultiport control valveService flow, media backwash demand, vessel diameter, drain, connections, and timer or meter control
Automatic softenerControl valve with injector or brine functionHardness, resin capacity, peak flow, salt dose, regeneration sequence, and volume per cycle
Interlock, drain, or dosing on/offSolenoid valveCv, differential pressure, coil voltage, wetted materials, normally open/closed position, and duty cycle
Process line with an air actuatorPneumatic valveInstrument-air pressure, actuator sizing, fail-open/fail-close position, feedback, and stroke time

Use the solenoid and pneumatic valve comparison guide to prepare Cv, differential pressure, fail-safe position, water quality, and commissioning checks. For filters and softeners, compare AQ Matic, Autotrol, Fleck, Runxin, and Siata from vessel and process-sequence data.

Control-valve brands buyers can compare

  • AQ Matic - Automatic and manual valve options for filter, softener, and deionization sequences
  • Autotrol - Filter and softener control valves matched to model, vessel, and flow data
  • Fleck - Automatic filter or softener control valves with accessories for the stated configuration
  • Runxin - Automatic and manual multiport valves with models for different duties and flows
  • Siata - Modular valves selected by process arrangement, connections, and control requirements

For more detailed information on each brand, please visit our product pages:

Runxin Control Valve - Automatic & Manual Solution for Softener and Filter

The following section summarizes Runxin Control Valves for water softeners, sand filters, carbon filters, and other water-treatment systems. Automatic and manual types cover different flows and functions; final selection must follow the data sheet, vessel size, and process sequence.

Advantages of Runxin Valve

  • Main material of ceramic and engineering plastic for corrosion and abrasion resistance
  • Automatic (time or volume based) or manual regeneration options
  • Dynamic LED display, error indicator, and auto-lock button for safety and monitoring
  • Interlock function for multi-valve systems (parallel/series)
  • Compatible with various tank sizes and water distribution systems

Available Runxin Valve Models

Here are some of the Runxin models available at PT Watermart Perkasa, complete with downloadable datasheets:

Runxin Valve Application in Water Treatment System

  • Household Softener & Filter Systems
  • Industrial Water Treatment (RO pretreatment, boiler feed, demineralization)
  • Commercial (hotels, hospitals, apartments, restaurants, laundry)
  • Food & beverage factories
  • Agriculture & irrigation
  • Swimming pool & water park
  • Municipal water treatment plant (WTP/WWTP)

Control-valve procurement support

  • Model codes and availability for Runxin, Fleck, Autotrol, AQ Matic, or Siata are confirmed at quotation
  • Vessel, flow, pressure, connection, and cycle-sequence data are reviewed before selection
  • Warranty, accessories, delivery, programming, and field support are stated for the quoted item and scope

Technical Specifications (Example: Runxin F63C1 Automatic Control Valve)

FeatureSpecification
StructureSimple, compact, sturdy
Head MaterialHigh corrosion and abrasion-resistant ceramic
ProgrammingManual & Automatic Regeneration (time or water meter)
Operation ModesTime clock (days/hours), Meter type (A-01/A-02/A-03/A-04)
Manual Regeneration”Manual/Return” button for immediate cycle
LED DisplayShows real-time status: service/regeneration, error/power failure
Backwash IntervalAdjustable (F68 type only supports interval setting)
Interlock FunctionFor multi-valve (parallel or series), only one valve regenerates at a time
Power Off IndicatorBlinks “12: 12” after >3 days without power
Button LockAuto-locks after 1 minute of inactivity
Supported Valve TypesF63C1, F63C3, F63G3, F68C1, F68C3, F68G3
Meter Type ModesA-01: Meter Delayed, A-02: Meter Immediate, A-03: Intelligent Delayed, A-04: Intelligent Immediate
MaterialCeramic, Engineering Plastic, Rubber/Elastomer, Anti-rust Metal

Download Complete Datasheet of All Runxin Models

Buyer questions about control valves

Can a solenoid valve replace a filter control valve?

Not for the same function. A solenoid valve generally opens or closes one flow path from an electrical signal, while a multiport control valve directs several paths for service, backwash, rinse, or regeneration. Select from the process sequence and hydraulic data, not connection diameter alone.

How should a filter or softener control valve be sized?

Use the largest required flow—often filter backwash flow—then check allowable pressure drop, vessel diameter, media or resin volume, connections, drain, and available pressure. A valve that passes the service flow may still be too restrictive for backwash.

What information is needed for a control-valve quotation?

Send the filter or softener duty, service and backwash flow, vessel diameter, media or resin volume, connections, pressure, cycle sequence, power supply, control type, existing model, quantity, location, and required date. For replacements, include photos of the label, ports, injector, meter, and accessories.

Request a water-treatment control-valve quotation

Send the water analysis, filter or softener duty, service and backwash flow, vessel diameter, connections, pressure, cycle sequence, power supply, existing model, quantity, location, and required date through the Watermart contact form. The written quotation will state the model code, accessories, documents, availability, delivery, and whether programming or commissioning is included.

WhatsApp