Spare Parts & Consumables
Pentair Pentek Cartridge Filters in Indonesia
Pentair Pentek cartridge filters address sediment, chlorine taste and odor, and RO prefiltration. Select the media, micron rating, length, and matching housing.
PT Watermart Perkasa, operating at water.co.id, supplies Pentair Pentek cartridge filters in Indonesia for sediment filtration, chlorine taste and odor reduction, RO prefiltration, and household, commercial, and industrial systems. Available types include polypropylene wound, melt-blown polypropylene, pleated polyester, ceramic, granular activated carbon, and carbon block cartridges. Buyers should match the filter media, micron rating, element length and diameter, housing size, flow rate, feedwater condition, and filtration target. Watermart can also connect the cartridge requirement with filter housings, RO pretreatment components, and related parts.
How Do You Select a Pentair Pentek Cartridge?
| Buyer requirement | Type or model listed on this page | Data to check |
|---|---|---|
| Capture sand, rust, and sediment | Polypropylene Wound, P1 SED, PD1-20, DGD-2501, or Polydepth | Micron rating, sediment load, flow rate, and pressure drop |
| Use a pleated surface filter | R Series or S1 | Media material, element dimensions, and housing compatibility |
| Reduce taste, odor, or chlorine | GAC Series, C1-20, CBC-10, EPM Series, or EP-BB | Target contaminant, contact time, flow rate, and replacement schedule |
| Filter with ceramic media | CRE-1 | Feedwater quality, product rating, and a separate disinfection stage when required |
| Protect RO membranes | A sediment cartridge selected for the water analysis and system design | Housing dimensions, micron rating, flow rate, and pressure-drop limit |
Micron rating alone is not enough to select a cartridge. Check the media, element length and diameter, seal, temperature, pressure, flow rate, and filtration sequence against the actual system data.
Polypropylene Wound Cartridges
Pentair Polypropylene Wound Cartridges are effective in removing particles from water with a robust polypropylene media, ideal for industrial and household applications.
GAC Series Granular Activated Carbon Cartridges
Pentair GAC Series uses granular activated carbon to reduce unwanted tastes and odors from water, including chlorine and organic chemicals, so water is fresher.
Pentek P1 SED PN 155225-43 Cartridge
Pentek P1 SED PN 155225-43 has a 1-micron rating for capturing particles such as fine sand and rust before the water reaches downstream equipment.
Pentek PD1-20 PN 155755-43 Cartridge
Pentek PD1-20 PN 155755-43 utilizes melt blown polypropylene media for high water flow, providing efficient particle filtration with large dirt holding capacity.
Pentek ECP1-10 PN 255481-43 Cartridge
Pentek ECP1-10 PN 255481-43 uses cellulose polyester media for sediment filtration in household and commercial applications.
CRE-1 Ceramic Cartridge
Pentek CRE-1 Ceramic Cartridge uses ceramic media for fine-particle filtration. Check the product rating and use a separate disinfection stage when microorganisms are part of the treatment target.
R Series Pleated Polyester Cartridges
Pentair R Series Pleated Polyester Cartridges offer high dirt holding capacity with pleated polyester media, ideal for applications with high water flow.
Pentek C1-20 Cartridge
Pentek C1-20 is an economical cartridge with a high capacity to remove bad tastes and odors, ideal for chlorinated water supplies.
Pentek CBC-10 Cartridge
Pentek CBC-10 is a carbon block cartridge for taste, odor, and chlorine targets. Any claim for a specific contaminant must follow the datasheet and rating of the model offered.
Pentek DGD-2501 Cartridge
Pentek DGD-2501 utilizes melt blown polypropylene media with a density gradient design, providing high dirt holding capacity and longer service life.
EPM Series Modified Epsilon Carbon Briquette Cartridges
Pentair EPM Series uses a modified carbon briquette for taste, odor, and chlorine targets under suitable operating conditions.
Pentek EP-BB Cartridge
Pentek EP-BB offers high efficiency removal of unwanted tastes and odors from water, including chlorine, for high water flow applications.
Pentek S1 Cartridge
The Pentek S1 Series uses pleated cellulose media for general water filtration, removing sediment and improving the taste and odor of water.
Polydepth Polypropylene Cartridge
Pentair Polydepth Polypropylene Cartridge uses melt-blown polypropylene depth media for particle filtration and dirt-holding capacity.
Pentair Pentek Cartridge Questions
Who supplies Pentair Pentek cartridge filters in Indonesia?
PT Watermart Perkasa supplies Pentair Pentek cartridge filters through water.co.id for household, commercial, and industrial water systems in Indonesia. For model matching or a quotation, send the housing details, cartridge dimensions, micron rating, flow rate, feedwater condition, and application through the Watermart contact page.
Can sediment and carbon cartridges replace each other?
Not in every case. Sediment cartridges capture particles, while carbon cartridges are selected for targets such as taste, odor, or chlorine. A multistage system may use both, but their sequence, flow rate, and replacement schedule should match the feedwater and treatment objective.
What information is needed to select a replacement cartridge?
Record the old brand and model, cartridge length and diameter, end-cap or seal type, housing size, micron rating, media, flow rate, pressure, temperature, and the water problem being treated. Photos of the label and housing interior help prevent a dimensional mismatch.
What other components are normally required with a cartridge?
A cartridge must be installed in a compatible housing. In an RO system, this stage is commonly paired with cartridge housings and related filters, RO membranes and pretreatment components, pressure gauges, and other parts specified by the system design.